微米级冷轧带钢厚度控制系统

分析、讨论了冷轧应用的各种厚度控制的优缺点，介绍质量流量厚度控制原理和控制精度极高的微米级带钢厚控（μＡＧＣ）系统及其可能产生的经济效益。     

方块电阻测试中的有限元理论

介绍了用有限元方法计算半导体方块电阻四探针测试中二维点电流势场的模型并且证明了其正确性。由于有限元方法对边界没有限制，该方法为方块电阻测试中精确确定边界修正系数，更重要的是为微样品测试结构确定提供直接明了的理论依据。     

用小尺寸R－CT试样研究核压力容器钢断裂韧性及与Charpy试样的比较

提出了一种用双边带深侧槽的小尺寸圆形紧凑拉伸试样评定核压力容器（ＲＰＶ）钢断裂韧性的单试作试验方法，给出了用该方法测定的两个厂家生产的核压力容器用Ａ５０８ＣＬ３钢的断裂韧性参数，还与Ｃｈａｒｐｙ试样的试验结果及大尺寸标准试样的试验结果进行了比较。研究结果表明：用双边带深侧槽的小尺寸Ｒ－ＣＴ试样测得的断裂韧性值比相同恻槽深度预制疲劳裂纹Ｃｈａｒｐｙ试样的测试值更接近有效断裂韧性值，所以，用于核压力容器断裂韧性的监测是可行的。     

模拟光耦SLC800在转台系统中的应用

在大功率转台控制系统中．存在着较大的电压干扰和电磁兼容问题。在转台的控制精度和驱动功率不断提高的情况下．本文使用模拟光耦隔离器件SLC800重新设计了转台中的某部分模拟电路．将功率放大电路和控制电路隔开，来增强系统的抗干扰能力和运行的可靠性。实验结果的分析和转台的运行表明：应用模拟光耦进行隔离，有效地消除了转台控制中的干扰和电磁兼容。     

河道维护费征收中需注意的几个问题

依法征收河道工程维护费,是水行政主管部门的一项重要职能,是强化水利依法管理的重要手段和筹措水利建设资金的重要途径。随着依法行政进程的不断推进,被征管单位依法维权的意识不断增强。根据《行政诉讼法》的规定,人民法院审查行政案件,对具体行政行为是否合法进行审查。根据《行政复议法》的规定,复议机关审查复议案件,对具体行政行为是否合法     

Reliability Analysis on the δ-Shock Model of Complex Systems

We investigate the delta-shock model of complex systems consisting of n i.i.d. components. We first obtain a general lifetime distribution for the delta-shock model of a general complex system by reducing the system to a linear combination of parallel systems. We then consider coherent system structures including series, parallel, and k-out-of-n, then derive some useful results including reliability bounds, bounds on the mean lifetime, limiting distributions, and Laplace-Stieltes transforms     

非理想信道下Colpitts混沌电路的自适应同步研究

本文研究了Colpitts混沌电路在非理想信道条件下的自适应同步问题。引入自适应控制器对输入到响应部分（response system）的衰变混沌信号进行预处理，来补偿衰落信道对于同步性能的影响。给出了系统的数学模型，对恒定信道衰变和时变信道衰变两种非理想信道条件下的混沌ColpiRs电路的自适应同步进行了数值仿真研究。仿真结果表明，对于恒定或慢变化的时变信道衰变，自适应控制器可以有效的提高Colpitts电路响应部分和驱动部分（Drive system）的同步性能。     

Nutrient removal performance of an anaerobic–anoxic–aerobic process as a function of influent C/P ratio

The laboratory scale anaerobic–anoxic–aerobic (A²O) process fed with synthetic brewage wastewater was designed to investigate the effects of changing feed C/P ratio on the performance of biological nutrient removal (BNR) processes. In the experiment, the influent chemical oxygen demand (COD) concentration was kept at approximately 300 mg L^?1 while the total phosphorus concentration was varied to obtain the desired C/P ratio. Results showed that when the C/P ratio was lower than 32, phosphorus removal efficiency increased as C/P ratio increased linearly, while when the C/P ratio was higher than 32, the P removal efficiency was maintained at 90–98%, and effluent P concentration was lower than 0.5 mg L^?1. However, regardless of the C/P ratio, excellent COD removal (90% or higher) and good total nitrogen removal (75–84%) were maintained throughout the experiments. It was also found that very good linear correlation was obtained between COD uptake per unit P released in the anaerobic zone and C/P ratio. In addition, the P content in the wasted activated sludge increased with the decrease in the C/P ratio. Based on the results, it was recommended that the wastewater C/P ratio and its effects be incorporated into BNR design and operational procedures, appropriate C/P ratios were used to achieve the effluent treatment goals. Copyright © 2005 Society of Chemical Industry     

Application of Direct Ignition Technology with Minimum Gasified Oil in Lignite-Fired Boiler

The firing is in the stable condition and the rate of oil saving comes up to 64%, after Fularji Power Plant adopted the technology of minimum gasified oil igniting pulverized lignite directly and the technology of multistage coal combustion with energy amplified stage by stage.